Hot off the Press


 

SHARE:  

Hydraulic Bending/Dishing Press Headed for India

Hydraulic Bending/Dishing Press Headed for India

Friday, June 6, 2008
 
German press builder Siempelkamp has received an order for an 80-MN bending and dishing press to produce dished ends and heads for pressure vessels used in power plants. The press will form plate to 8 in. thick in lengths to 38 ft. With a daylight of 20 ft., the press will be able to manufacture components as large as 7.5-ft. dia. In addition to the press, Siempelkamp will supply forming and dishing dies and two automatic manipulators for positioning components inside the press. Learn more at www.siempelkamp.com.

 

Visit Our Sponsors