Previews


 

SHARE:  

Servo-Press Production System

Thursday, October 1, 2015
 
Stamtec

Stamtec
Booth S4131

The Stamtec booth will be flush with equipment set up as a complete servo-press production system. Included will be a 176-ton, two-point, direct-drive Model iS2-176 press, with variable stroke length, via pendulum motion, to 8.66 in., and offering variable, programmable stroke profiles including coining, drawing, in-die heating and fineblanking modes. Other equipment in the booth: a TLN2-300 servo feed line (material capacity from 5.70 in. wide by 0.125 in. thick to 11.8 in. wide by 0.078 in. thick), and a Forwell quick-die-change system with hydraulic die clamps and lifters, and bolster extensions.

www.stamtec.com

 

 

See also: Stamtec, Inc.

Related Enterprise Zones: Presses

Visit Our Sponsors