Hot off the Press



Rebuilt 600-Ton Minster Press Debuts at Talan Products

Friday, August 21, 2015
Talan Products, Cleveland, OH, has installed a remanufactured Minster Hevi-Stamper 600-ton press. With a bed size of 132 by 54 in., it becomes the largest press in the Talan production system. It features a 12-in. stroke and can operate at speeds to 50 strokes/min. It anchors a press line capable of handling high-strength, low-alloy steel coil to 36 in. wide by 0.375 in. thick, and 12 in. wide by 0.5 in. thick. The line includes new controls as well as a new cradle and leveler, and new feeders.
In addition, Talan has installed a new vibratory deburring machine, capable of handling stampings to 14-in. dia.
“This is a major step forward for us, in that it will enable us to move a lot of our outsourced work inhouse,” says Steve Peplin, Talan’s CEO, commenting on the new line. “It will move more of our manufacturing capabilities into a centralized location, which will help to further improve the ease of doing business with Talan.”
For more on Talan Products, visit


Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors