Precision Leveler Providing Shape Correction for Boron-Clad Material
December 1, 2008Ceradyne Canada, Chicoutimi, Quebec, Canada, a manufacturing division of Ceradyne Inc., Costa Mesa, CA, installed a precision leveler to accompany a new rolling mill used to process boron-clad material. The leveler, a 3.5 Series machine from B&K, of Formtek-Maine, Clinton, ME, features 17 work rolls —3.5-in. dia.—and a 100-hp drive to provide shape correction to material in thicknesses to 0.330 in. and lengths to 192 in. It also has a special, low passline height of 32 in. to allow the material to move directly from the rolling mill through the leveler and onto conveyors.
Other leveler features: manually adjustable upper backups, a power tilt head and power-adjustable backup roll to allow for the correction of edge wave, center buckle, cross bow and coil set.
See also: Ceradyne, Inc., Formtek Group, Inc.
Technologies: Coil and Sheet Handling
Automatic Feed Debuts New Coil-Feed Lines, and the Edge Stac...
Monday, February 7, 2022
Coil and Sheet Handling
Monday, February 7, 2022
Automatic Feed Debuts Coil-Feed Lines for High-Strength Stee...
Monday, February 7, 2022
Servo Feed Line Featured, with Automated Straightener Setup
Friday, July 16, 2021

Colt Automation Launches New Website
Friday, June 4, 2021
Comments
Must be logged in to post a comment. Sign in or Create an Account
There are no comments posted.