Hot off the Press


 

SHARE:  

White Paper: The Bulge Test for Material Formability Evaluation

Tuesday, June 18, 2019
 
Tensile testing over time is the first step in determining property variation for new material forming. However, industrial stamping processes often experience higher strain that surpasses tensile-testing capabilities. For these instances, bulge testing can dramatically improve the accuracy of the yield surface of new materials.
The EWI Forming Center, Columbus, OH, recently developed the bulge test capability to obtain flow stress of sheet metals to the highest strain level before necking. This differs from conventional bulge testing by adopting digital image correlation (DIC) cameras to determine bulging height and curvature profile for strain calculation. You can learn about it in The Bulge Test: A Valuable Tool for Material Formability Evaluation, an EWI white paper.

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors