Hot off the Press


 

SHARE:  

Stamper Adds Space-Saving Servo Feed

Stamper Adds Space-Saving Servo Feed

Monday, May 22, 2006
 
ODM Tool & Manufacturing, McCook, IL, has taken delivery of a new Space-Saver servo-feed system from Dallas Industries, Troy, MI, which, it says, takes up half to two-thirds the amount of floor space of a conventional feed system. The feed can handle coils to 30,000 lb., 48 in. wide, 72-in. dia. It can feed ½-in.-thick stock to 48 in. wide. Included with the setup is motorized 14-in. passline-height adjustment; hydraulic press-attachment clamps; a 5-in.-dia. piloting straightener mounted on the entry end; and a combination coil restrictor, peeler, threader and debender. Learn more at www.dallasindustries.com.

 

Visit Our Sponsors