Hot off the Press


 

SHARE:  

Davis Tool Adds Dallas Servo Press-Feed System

Davis Tool Adds Dallas Servo Press-Feed System

Thursday, June 19, 2003
 
Davis Tool and Engineering, Detroit, MI, has installed a Dallas Space-Saver electronic servo press-feed system with 20,000-lb., 42-in.-wide by 72-in.-o.d. capacity. Davis builds tools and dies for Tier One and Two automotive suppliers, and performs job-shop stamping operations. The new feed system consists of a motorized coil reel that includes a load-car feature and a combination unit that acts as a coil restrictor-peeler-threader-debender, a powerful electronic servo-feed and pull-through straightener and a Dallas LSP automatic inline stock oiler. Learn more about Dallas press-feed and coil-handling equipment at www.dallasindustries.com.

 

Visit Our Sponsors