Hot off the Press


 

SHARE:  

Willett Builds Muffler-Baffle Die with 281 Punches

Willett Builds Muffler-Baffle Die with 281 Punches

Friday, June 7, 2002
 
Tool designer and builder M.S. Willett, Inc., Cockeysville, MD, has designed and built a six-station progressive die to produce six different automotive muffler baffles, of 1.2-mm-thick Type 304 stainless steel. The die has 281 4-mm punches. The die set, already in service for 6 months, is of aluminum alloy and can run at up to 65 strokes/min.

 

Visit Our Sponsors