Speakers

Ashley Martof, Industry Liaison, Youngstown Business Incubator
Dr. Jim McGuffin-Cawley
, Professor of Engineering and Interim Dean of School of Engineering,
Case Western Reserve University
Andy Meinert, Manufacturing Project Engineer, Caterpillar Advanced Components Manufacturing
Matthew L. Schmidt, Additive Manufacturing Manager, rp+m
Jonathan Schroeder, PE, MBA, President, 3D Platform
Ian Wing, Manager, Deloitte Consulting Strategy & Operations

Ashley Martof

Industry Liaison
Youngstown Business Incubator

Ashley Martof joined the YBI team in May of 2017 as the Industry Liaison for multiple additive manufacturing programs, and assists the Incubator in business case analysis and cost modeling for AM related projects. Ashley received her BE and MSE in Industrial and Systems Engineering from Youngstown State University. Previously as a graduate research assistant her research interests involved analyzing business models for the use of additive manufacturing for aerospace maintenance and sustainment.

^ Top


Dr. Jim McGuffin-Cawley

Professor of Engineering, and
Interim Dean of the School of Engineering
Case Western Reserve University

���James McGuffin-Cawley is the interim dean of the Case School of Engineering. McGuffin-Cawley is the Arthur Holden Professor of Engineering and an accomplished researcher, teacher and liaison with industries throughout Northeast Ohio. In the mid-2000s, he served for five years as Case School of Engineering's associate dean for academics, then spent nine years as chair of the Department of Materials Science and Engineering, where he led significant curricular reform. Last year, he was named the school's associate dean for research. McGuffin-Cawley also has served as the university's governing board representative and executive committee member of America Makes (previously known as the National Additive Manufacturing Innovation Institute) since its creation five years ago. After receiving his undergraduate degree in ceramic engineering from Alfred University, McGuffin-Cawley went on to earn his doctorate in ceramic science from Case Western Reserve in 1984. He then spent two years working in Northeast Ohio at NASA before joining the engineering faculty at The Ohio State University. He returned to Case Western Reserve in 1991. McGuffin-Cawley's research in ceramics and powder metallurgy spans more than twenty years and includes contributions to the fundamental studies on transport phenomena, high-temperature stability of ceramic microstructures, agglomeration phenomena, and novel solid-freeform-fabrication powder processing. He has worked both on oxide and nonoxide ceramics, as well as powder metallurgy. His work on solid Freeform Fabrication of 316L stainless steel using the method of computer-aided manufacturing of laminated engineering materials pioneered the use of a secondary binder as a transient fluid to enable consolidation of partially debound laser-cut sheets.

^ Top


Andy Meinert

Manufacturing Project Engineer
Caterpillar Advanced Components Manufacturing (ACM)

Andy Meinert is a Manufacturing Project Engineer in Caterpillar's Advanced Components Manufacturing Division, where his focus is on identifying strategic problems using data analysis and then solving those problems in innovative ways. He leads a Global 3D printing Community of Practice within Caterpillar, bringing together many different people, methods, and cultures. This Community served as the source for the examples he'll talk about today. Andy earned his BS degree in Mechanical Engineering from the University of Illinois in 1989. He learned to 3D print on a machine he designed and built.

^ Top

Matthew L. Schmidt

Additive Manufacturing Manager
rp+m

Matt Schmidt is the Additive Manufacturing Manager for rp+m, Rapid Prototype and Manufacturing, where he is responsible for the education and engineering of polymer and metal 3D Printed solutions for his customers. rp+m is commitment to providing sustainable additive manufacturing solutions and innovation for prototype and production usage. Matt has been a New Product Development Engineer for over 20 years and involved with various 3D Printing technologies for over 12, at both the design and systems level. His primary background served the Medical, Aerospace and Commercial Building markets where he holds six US Patents. rp+m is a founding member of America Makes and Matt with the Additive Manufacturers User Group.

^ Top


Jonathan Schroeder, PE, MBA

President
3D Platform

Jonathan has a BS in Mechanical Engineering from Rose-Hulman Institute of Technology and an MBA from Kellogg's Executive Program (EMBA). He is a licensed, professional engineer (PE) and has over a dozen patents (pending/granted).

^ Top


Ian Wing

Manager
Deloitte Consulting Strategy & Operations

Ian Wing is a manager in Deloitte Consulting's Strategy & Operations practice. He brings more than a decade of experience solving complex challenges for Federal and military customers to bear on his client engagements. Wing's prior experience was in research and development at a major defense and intelligence contractor, and he now focuses on helping clients realize supply chain efficiencies and develop new capabilities with additive manufacturing and other advanced technologies.

^ Top


 

 

SPONSORED BY:

 

Sponsorships Available