Tech Update



Eddy-Current Clutch/Brake Safety Controller

Sunday, February 1, 2009
Cieco Inc., Clinton, PA, has released a press safety clutch/brake controller to interface with an eddy-current clutch/brake system. The Automator II eddy-current clutch/brake press-control module reportedly is the only dedicated system available to provide safety-compliant operation for presses using eddy-current clutch/brake controllers.

Most presses using eddy-current clutch/brake controllers have been operating outside of OSHA and ANSI safety regulations for power presses, according to Cieco officials. With the Automator II interface, users can comply with the latest safety standards and still maintain the speed regulation and features of their eddy-current controller.

Cieco Inc.: 412/262-5581;


See also: Cieco, Inc.

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors