Page 6 - MetalForming August 2017
P. 6

   Editorial
Brad F. Kuvin
Energy Savings Fall Right to the Bottom Line
Just a few weeks ago, on July 13, U.S. Representatives Peter Welch (D-VT) and Tom Reed (R-NY) introduced the Smart Manufacturing Leadership Act, designed to authorize state grants to help small to midsized manufacturers (with less than $100 million in sales and fewer than 500 employees) adopt “smart” manufacturing technologies. (Senator Jeanne Sha- heen, D-NH, introduced companion legislation in the Senate). The goal, as the legislators define “smart” manufacturing, is to reduce energy costs and carbon emissions. The bill also directs the Secretary of Energy to develop a national smart-manufacturing plan. These pieces of legislation follow similar legislation introduced in 2015, which failed to pass.
Pass or not, the act brings to the forefront the need for manufacturers to focus on what can be a big number on their budgets right about now—energy costs. Yes, we are deep into the dog days of summer—a phrase whose origins date back to the ancient Greeks. They noticed that the star Sirius, in the canine constellation Canis Major, was present in the sky during the hottest part of the year. Over time, the phrase has come to refer to the sweltering temperatures occurring at the peak of summer.
So, now is the perfect time for manufacturers to review their energy polices and conduct an intensive energy audit. From lighting systems to HVAC equipment to operating machinery, opportunities abound to take a bite out what can be a significant expense. Inspect, assess and evaluate the most significant energy hogs in your facility, and I bet you’ll unearth
 “Inspect, assess and evaluate the most significant energy hogs in your facility, and I bet you’ll unearth opportunities to drop significant savings to the bottom line.”
opportunities to drop significant savings to the bottom line. In addition to finding ways to use less energy, smart manufacturers may find opportunities to shift energy- intensive activities to off-peak hours, and identify (and address) energy-wasting activities and inefficiencies.
In a recent blog post from Brian Lagas, who manages the NIST MEP (Manufacturing Extension Partnership) sustainability, continuous improvement and export ini- tiatives, we learn of several (seven to be exact) tips to
reduce energy costs (nistmep.blogs.govdelivery.com). They include evaluating compressed- air systems for leaks, upgrading aging HVAC equipment with new fans and motors, and installing waste-heat recovery systems.
Don’t run and hide from these types of actions. Businesses that put a fresh charge into their energy-management programs yield good results. So finds the 2017 Energy Decision Makers Survey Report, which reveals that 94 percent of U.S. and Canadian businesses are acting to reduce their energy use. A whopping 85 percent have lowered their energy costs via sound energy-management practices, and 25 percent have cut costs by more than 20 percent simply by procuring new energy-efficient equipment. Perceptive businesses also monitor the energy market for opportunities to cut costs—the survey finds that of the com- panies that do so, 54 percent reduce their energy costs by more than 10 percent.
What actions make the biggest impact? The survey finds that 47 percent use monitoring technology, and 65 percent promote energy-saving practices. One more tip from Lagas:
“Secure employee buy-in...Getting your staff involved will empower them to develop new ideas... (Help them see that) reducing energy costs may yield enough energy savings to invest in a new piece of equipment, to make their jobs easier.”
Publisher/Editorial Director bkuvin@pma.org
 4 MetalForming/August 2017
www.metalformingmagazine.com
              © 2017 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800 | fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | Roy Hardy rhardy@pma.org
Publisher/Editorial Director | Brad F. Kuvin bkuvin@pma.org
Senior Editor | Louis A. Kren lkren@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
Art Director | Donna M. D’Amico ddamico@pma.org
Web/Graphic Designer | Mike Novatny mnovatny@pma.org
Production Manager | Susan Cubranich scubranich@pma.org
Circulation Manager | Melody Berendt mberendt@pma.org
Circulation Assistant | Terri Reid treid@pma.org
Sales and Marketing Staff
OH, Western NY, Western PA, Canada, International
MI, North Central, California Ryan King 773/414-9292 | rking@rkmediaadv.com
New England, Eastern NY, Eastern PA Frank Colonno 201/962-2759 | fjcolonno@optonline.net
South Atlantic, South Central
Bob West
678/377-5749 | metalform_bobwest@msn.com
Inside Sales Manager
Ilene Schwartz 216/901-8800 | ischwartz@pma.org
Marketing Director | Susan Hunter-Vazinski shunter@pma.org
Marketing Coordinator | Drew Gutierrez dgutierrez@pma.org
Meetings & Events Manager | Katlyn Stratis kstratis@pma.org
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
                                         Use smart phone to go to www.metalformingmagazine.com



























































   4   5   6   7   8