Page 6 - MetalForming May 2013

Editorial
Brad F. Kuvin
Turning Skilled Workers into Masters of Machinery
Used to be the notion of a skilled worker employed in manufacturing could turn a wrench with the best of ’em. A worn leather tool belt sagged at the hips, steel-toed boots shuf- fled through metal chips and stamping lube, and knuckles glowed red. It was on the backs of these hard-working folks that many a metalworking factory thrived for generations. Some still do, but the definition of “skills”—when it comes to what manufacturing compa- nies need on their shop floors in order to succeed—is changing. And this change is coming quickly, right before our very eyes.
Today’s metalforming companies need quick thinkers and problem solvers, factory-floor workers who adapt to new on-the-job requirements coming at them daily, if not hourly. The tools in their belts have been augmented by a whole new set of tools. These include the abil- ity to communicate orally and in writing, to solve problems and to make quick, timely deci- sions—the right decisions.
In short, the skilled workers of today and tomorrow must think like engineers. Merely run- ning the machines won’t cut it; they must be dedicated and capable of making our machines run more quickly, producing consistently higher quality parts at ever-higher rates of pro- ductivity. They are, as much as any other employees, the profit-drivers in our industry.
Give the article a read to learn how they’re doing.
Also featured in this issue is an article that reviews new and sig-
nificant enhancements offered in the latest versions of several die-
design and development software products. The article serves as a precursor to our upcoming Die Design and Simulation Software Experience, scheduled for May 29-30 in Grand Rapids, MI. The “experience” is a 1.5-day submersion in die-development technology. It includes product demonstrations from four leading software suppliers, four case-
study presentations and three keynote addresses.
Among our keynoters are Chrysler quality center manager J.P. McGuire, who will speak on new
die-engineering standards at Chrysler and their impact on die design; and industry consultant Paul Hamilton, who will present on the topic: “Parametric vs. Direct Modeling—Key design require- ments for stamping-die design, and applying the various modeling technologies to those requirements.” The third keynote presentation comes from Joe Guarriello, director of engineering at Die-Tech Inc. His topic: “Critical Errors to Avoid in Precision Metal Stamping Design.”
If you’re looking to learn all about what’s new in die design and development software, and want to rub elbows with experts in this field, there’s no better place to be than MetalForm- ing magazine’s Die Design and Simulation Software Experience. Check out the entire agen- da and register to attend by visiting www.metalformingmagazine.com/diedesign.
For a great example of factory-floor profit-driving, check out the article beginning on page 24 of this issue of MetalForming. Here we learn how engineers and machine operators at stam- per/fabricator Premier Tool & Manufacturing have collaborated to perfect pierceless laser cutting. The firm’s brand-new fiber-laser cut- ting machine is part of a production cell that includes three press brakes and a mechanical press. Keeping those machines stocked with laser-cut blanks holds the key to a speedy payback for the laser.
“The skilled workers of today and tomorrow must think like engineers. Merely running the machines won’t cut it.”
See you in Grand Rapids.
4 MetalForming/May 2013
www.metalformingmagazine.com
Editor bkuvin@pma.org www.pma.org/blog
Serving those who create precision metal products using stamping, fabricating and other value-added processes.
© 2013 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800 | fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | William E. Gaskin, CAE wgaskin@pma.org
Group Publisher | Andrew Flando aflando@pma.org
Editor | Brad F. Kuvin bkuvin@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
Art Director | Donna M. D’Amico ddamico@pma.org
Production Manager | Susan Cubranich scubranich@pma.org
Circulation Manager | Barbara Tillett btillett@pma.org
Marketing Coordinator | Rachel Rokoff rrokoff@pma.org
Sales Staff
MI, OH, Western NY, Western PA, Canada, International Andrew Flando, Group Publisher 6363 Oak Tree Blvd. Independence, OH 44131
Ph: 216/901-8800 | Fx: 216/901-9669 aflando@pma.org
North Central, California
Ryan King
1900 North Hudson #D Chicago, IL 60614
Ph: 773/414-9292 | Fx: 267/219-4308 rking@rkmediaadv.com
New England, Eastern NY, Eastern PA John Wagner
32 Niagara Dr., Suite 101 Mahwah, NJ 07430
Ph: 312/236-4366 | Fx: 312/276-4577 jwagner@wngmedia.com
South Atlantic, South Central Bob West
855 Georgian Hills Dr. Lawrenceville, GA 30045
Ph: 678/377-5749 | Fx: 678/377-9098 metalform_bobwest@msn.com
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
Use smart phone to go to www.metalformingmagazine.com