Page 6 - MetalForming March 2011

Guest Editorial
Bob Clay
Stand Up and be Heard
My first real involvement with policymakers in Washington, D.C., began in 2002 when the government placed a 30-percent tax on the steel we bought at Pridgeon & Clay. We and other U.S. manufacturers were paying the highest steel prices in the world, while our competitors in other countries could ship the same parts made from globally com- petitive steel into our U.S. markets. That same year, labor unions spent $28 million on lob- byists in Washington. In 2010, that figure ballooned to $47 million spent on more than 400 lob- byists, and another $73 million contributed to congressional candidates. It was a real wakeup call to me—our industry of small- to midsized manufacturing companies did not have a voice where we needed it most, in our nation’s capital.
Because of that 2002 wakeup call, the Precision Metalforming Association (PMA) began to fight back. We hired lobbyists, organized fly-ins to Washington, testified before Congress and government agencies, and met with our Senators and Representatives to make our voice heard, and in 2003, President Bush revoked the 30-perent tax on steel.
This experience taught us a lesson: Government is the single largest factor affecting our manufacturing businesses, and we can change its policies if we apply our resources. Today, thanks to PMA’s continued efforts in Washington, our industry has a seat at the table and a chance to make a difference. Our team is often contacted by legislators to learn what small manufacturers need to be successful.
Government is the single largest factor affecting our manufacturing businesses, and
we can change its policies if we apply our resources.
Last year, we helped stop a climate-change bill that would have increased our costs; prevented tax increases by passing an extension of the current income rates; and extended a number of manufacturing tax credits, including those for R&D, equipment expensing and bonus depreciation. We also spurred our industry’s recovery by improving credit access for small businesses. And, last fall we worked with Con- gress to pass a law that helps community banks lend to companies like ours, a program which the Treasury Department is launching this month. In 2011, we’re off to a fast start in Washington. The Senate already has passed a bill to repeal the 1099 reporting rule included in healthcare reform, which would require businesses to file tax forms (beginning
in 2012) for every vendor that sells them more than $600 in goods, property or services. Metalworking companies have a chance to build on these numerous victories, but count- less challenges remain. We must all work together and with our trade associations to ensure that our voice remains heard. Whether through contributions of time or money, I have learned that we can only change Washington if we have a seat at the table, and we need more of our friends to join us there. Very recently, the unions spent $400 million to pass just one bill—The Employee Free Choice Act, better known as the Card Check bill. We fought back and
won, but only because we came together with one voice.
As PMA’s 2011 Chairman, I have placed a strong emphasis on advocacy. The joint
PMA/National Tooling and Machining Association (NTMA) annual legislative conference occurs April 5-6 in Washington, D.C. PMA and NTMA member companies will meet with leg- islators and continue to spread our message. This is one of the most important association events a business leader can attend—please help our cause by joining us there. If we don’t stand up for ourselves, who will?
Bob Clay
CEO, Pridgeon & Clay Grand Rapids, MI bclay@pma.org
4 MetalForming/March 2011
www.metalformingmagazine.com
Serving those who create precision metal products using stamping, fabricating and other value-added processes.
© 2011 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800
fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | William E. Gaskin, CAE wgaskin@pma.org
Publisher | Andrew Flando aflando@pma.org
Editor | Brad F. Kuvin bkuvin@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
ArtDirector | Donna M D’Amico ddamico@pma.org
ProductionManager | Susan Cubranich scubranich@pma.org
Circulation Manager | Barbara Tillett btillett@pma.org
Sales Staff
MI, OH, Western NY, Western PA, International Andrew Flando, Publisher 6363 Oak Tree Blvd. Independence, OH 44131
Ph: 216/901-8800 | Fx: 216/901-9669 aflando@pma.org
North Central, California
Ryan King
855 Featherstone Dr.
Fontana, WI
Ph: 773/414-9292 | Fx: 262/394-5269 rking@rkmediaadv.com
New England, Eastern NY, Eastern PA Rick Edman
576 Post Road
Darien, CT 06820
Ph: 203/656-1000 | Fx: 203/656-1007 Rick_Edman@edmancompany.com
South Atlantic, South Central Bob West
855 Georgian Hills Drive Lawrenceville, GA 30045
Ph: 678/377-5749 | Fx: 678/377-9098 MetalForm_bobwest@msn.com
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
Use smart phone to go to www.metalformingmagazine.com