Page 46 - MetalForming October 2019

Conference Sessions
visual monitoring tool was recently introduced to monitor the stamping quality in production. This presenta- tion introduces industrial case studies with the real-time machine vision sys- tem to monitor and assess the stamp- ing quality.
Hyunok Kim, EWI Forming Center, and Michael Selent, Selamatec Systems
Lubricants 2—Chlorinated Metalworking Fluid: Facts, Fiction & Options
Are chlorinated metalworking fluids a real concern for your operation? This presentation provides a review of cur- rent regulation and much of what has been discussed and proposed, includ- ing: real concerns versus misconcep- tions, and how a ban on these mate- rials impact your company and our industry.
Bob Anderson, Tower Metalworking Fluids
Avoiding Oil Mist Mishaps
Fine oil mists generated by machin- ing, stamping and other processes pres- ent control challenges. Uncontrolled oil mists are hazardous for employees and can damage electronics and other equipment components. This presen- tation addresses metalworking fluids and health/safety risks associated, and OSHA regulations and ACGIH recom- mendations for oil-mist exposure.
Frank Cea, RoboVent
Tuesday, November 12
8–9:30 a.m.
Materials 1—Utilizing Advanced Materials & Joining Technologies to Lightweight Current and Future Mobility Solutions
The presentation addresses trends and developments in the technologies for car body structures, including: advanced steel (cold stamping and hot stamping); applications in 3rd gener- ation advanced high-strength steels;
high-strength steels and aluminum (high-pressure die casting and low- pressure die casting) solutions; and relevant joining technologies.
Stephen Rawe, Martinrea
Tensile Tests, Metal Certs and Simulation
Coils are a mile long but tensile tests are taken from one coil end. Plus, metal grades have a property distribution throughout the coil. Is one tensile test enough to characterize its perform- ance? What about properties that aren’t mentioned on a cert or included in tensile test results? This presentation provides valuable insights into tensile tests, metal certs and forming simula- tion results.
Danny Schaeffler, Engineering Quality Solutions
Connectivity 1—Sensors & Connectivity Improvements for Transfer Die Applications
In a transfer press line, issues with
44 MetalForming/October 2019
www.metalformingmagazine.com