Page 6 - MetalForming April 2015

Editorial
Brad F. Kuvin
Kaikaku vs. Kaizen
Metalforming and fabricating companies undoubtedly have become very familiar with the Japanese business concept of kaizen. It preaches the philosophy of making incre- mental (and relatively minor) changes in processes and procedures to drive continuous innovation. While we all should (and most, I believe, do) practice this philosophy day to day, our industry’s future prosperity rests on another Japanese business concept—kaikaku.
Literally translated, kaikaku means “radical change.”Kaikaku projects introduce totally new ideas or production techniques, and often new capital equipment. As such, these projects typically are initiated by top management because they’re more costly to implement and must yield a greater return than the typical kaizen project. I’ve heard of kaizen ideas returning 5- to 10-percent gains; kaikaku events should yield 30-percent gains or greater.
I recently experienced a kaikaku-like information download at The MFG Meeting in Orlando, FL (March 4-7). Programming was delivered to stir up new ways of leading our industry to future prosperity. Kickoff keynoter George Blankenship (former Apple Inc. and Tesla Motors executive) told the engaged audience of executives, “Customers want suppliers that innovate. If you don’t, someone else will. You have to push beyond the limits.”
I’ve written plenty about innovation in this space in recent months, with a focus on sensors and controls. And that theme rang true at The MFG Meeting as well, in particular when Blankenship relinquished the stage to PTC executive Rob Gremley. Executive vice president of two PTC business segments— Internet of things (IoT) and service lifecycle management— Gremley shed light on how IoT strategy is rapidly moving beyond
“Harbour recommends that companies conduct a talent/task- alignment exercise.”
tech-geek discussions and into manufacturing operations.
The IoT discussion points to the dawn of the smart factory— and make no mistake, the sun is rising on this important innovation strategy, fueled by the development of the industrial Internet and mobile-device apps for met- alforming-related operations. Low-hanging fruit includes performance-based maintenance scheduling. As described by Gremley, this takes predictive/preventive maintenance to a new level. For example, with sensors connected to a stamping press, whose data is delivered via the Internet to a mobile app, technicians can receive immediate feedback on key performance variables. Hence, there’s no need to create and adhere to maintenance schedules based on
theoretical, predicted performance.
After listening to Blankenship, Gremley and others expound on innovation at the highest
level, it was refreshing to hear speakers offer some practical advice. Such was the case when Laurie Harbour, Harbour Results, Inc., presented her “Five Best Practices that Impact Your Business Today: Preparing for Future Success.” Among them, Harbour recommends that companies conduct a talent/task-alignment exercise.
Using this exercise, companies would strive to assign highly skilled employees to those tasks that require the most skill. Sounds simple, but I’m sure—and so is Laurie—that most if not all shops have their skilled employees performing at least some tasks better left for less-skilled people. The end result of aligning your task list to your skill inventory is, perhaps, the realization that your skilled-labor shortage may not be as critical as you think.
That sounds like kaikaku to me.
4 MetalForming/April 2015
www.metalformingmagazine.com
Editor bkuvin@pma.org
© 2015 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800 | fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | William E. Gaskin, CAE wgaskin@pma.org
VP, Group Publisher | Andrew Flando aflando@pma.org
Editor | Brad F. Kuvin bkuvin@pma.org
Senior Editor | Louis A. Kren lkren@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
Art Director | Donna M. D’Amico ddamico@pma.org
Web/Graphic Design | Mike Novatny mnovatny@pma.org
Production Manager | Susan Cubranich scubranich@pma.org
Circulation Manager | Barbara Tillett btillett@pma.org
Asst. Circulation Manager | Melody Berendt mberendt@pma.org
Circulation Assistant | Terri Reid treid@pma.org
Sales and Marketing Staff
OH, Western NY, Western PA, Canada, International Andrew Flando, VP, Group Publisher 216/901-8800 | aflando@pma.org
MI, North Central, California Ryan King 773/414-9292 | rking@rkmediaadv.com
New England, Eastern NY, Eastern PA John Wagner 312/236-4366 | jwagner@wngmedia.com
South Atlantic, South Central
Bob West
678/377-5749 | metalform_bobwest@msn.com
Inside Sales Manager
Ilene Schwartz 216/901-8800 | ischwartz@pma.org
Marketing Director | Susan Hunter-Vazinski shunter@pma.org
Marketing Coordinator | Rachel Rokoff rrokoff@pma.org
Marketing Coordinator | Kristen Kerns kkerns@pma.org
Meetings & Events Manager | Katlyn Stratis kstratis@pma.org
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
Use smart phone to go to www.metalformingmagazine.com