Page 35 - MetalForming March 2014

Welding Technology
Quick-Response Resistance-Welder Service
ADVERTORIAL
When your produc- tion line goes down because a resistance- welding machine quits working, it’s usually not long until a crisis builds.
That’s when the serv-
ice team atT. J. Snow
Company often can lit-
erally “save the day” by
flying to a customer’s
location with the
expertise and spare parts necessary to get the welder back in produc- tion quickly.
With four instrument-rated pilots on staff and two speedy single- engine airplanes at the ready,T. J. Snow is uniquely qualified to respond to a resistance-welder breakdown situation.
Rather than dealing with the
delays of traveling by car or com- mercial airlines,T. J. Snow, which is located adjacent to the airport in Chattanooga,TN, often can be air- borne soon after a call for help. And, the ability to land at a small airstrip near the customer’s plant saves even more time.
With a diversified inventory of spare parts for resistance welders
available, and even complete replacement controls in stock,T. J. Snow can usually repair or replace what’s wrong and get the machine back into production quickly. It’s not unusual for Snow’s experienced service tech/pilot to have the welder back online within an hour or two after arrival.
So, why wait? CallT. J. Snow for “sudden service” that’s “planely” superior.
Get their tails moving!
T.J. Snow Company 120 Nowlin Ln. Chattanooga,TN 37421 423/894-6234 www.tjsnow.com
ADVERTORIAL
T. J. SNOW CO.
Welding Technology
Edge-Beveling Equipment and Solutions
Saar-Hartmetall USA is the official distributor for the GERIMA line of beveling tools and machines. We offer a wide range of solutions for edge weld-prep to the metal-fabrication industry including portable and sta- tionary edge-bevel- ing machines for plate and pipe.
Our line of hand-held beveling machines can apply straight bevels and/or radii along straight and con- toured edges of plates and pipes. Our lineup of stationary beveling machines is robust, with edge- milling machines for a wide variety of edge-prep applications.They are
especially efficient in high-volume applications.
We also offer stationary, high- performance bevelers utilizing high- ly abrasive ceramic grinding belts. These machines can bevel the edges of large and thick plates, very hard metals, and can be used on
small and large workpieces.
Our complete line of beveling
equipment includes:
• Pneumatic and electric portable
beveling tools
• Portable and stationary pipe
bevelers
• Stationary mechanical beveling
machines
• High-performance plate-bevel-
ing machines
• Shell mill beveler for CNC
machining center
Saar-Hartmetall USA 1009 Mary Laidley Dr. Covington, KY 41017 Phone: 859/331 8770 www.shmusa.com
www.metalformingmagazine.com
MetalForming/March 2014 33