Page 6 - MetalForming November 2013

Editorial
Brad F. Kuvin
Lead Time as a Management Strategy
What would happen to your company if within 90 days you went from having 25 per- cent excess manufacturing capacity to being 15 percent under capacity, due to a rush of orders?
That’s exactly the challenge that Choice Fabricators faced a couple of years ago. As detailed in my article beginning on page 14 of this issue, its pressroom felt the added pres- sure to perform when an appliance OEM decided to reshore much of its offshored work. As explained by owner and president David Chadwick, the firm met the capacity challenge by adding new presses—faster and more accurate presses. He was lucky to be in such a position to add new technology. Or, maybe he made his own luck.
Either way, not all metalformers can acquire new technology every time new contracts land at the door. So, what’s the alternative to alleviating capacity constraints and opening up new production capacity? One solution comes from Superior Die Set Corp., also profiled in this issue (page 24) in an article on the benefits of paperless manufacturing. Rapid manufacturing, says Superior’s president Frank Janiszewski, allows the company to quote and process significantly more orders, with less labor and less supervision. The result is optimized material flow.
Janiszewski explains that the key to rapid manufacturing (or quick-response manufacturing, QRM) is treating lead time as a management strategy. For Janiszewski, every day a customer has to wait for a quote cuts into lead time. So, paperless manufacturing doesn’t just help Supe- rior turn around quotes in a day or less; it enables QRM.
“Time-based thinking rather than cost-based, we learn, forces manufacturers to focus on efficiency.”
I looked up QRM on Wikipedia, and the definition surprised me. While I expected to read that QRM meant reducing lead times, I did- n’t expect to learn of the breadth of the benefits QRM can deliver.
Time-based thinking rather than cost-based, we learn, forces manufacturers to focus on efficiency. It follows, then, that becom- ing more efficient creates capacity. Not only do the most efficient metalformers squeeze more production from their resources,
they’re also better prepared to meet sudden surges in demand. And, as the Wikipedia defi- nition for QRM says:
“The time-based framework of QRM accommodates strategic variability such as offering custom-engineered products, while eliminating dysfunctional variability such as rework and changing due dates.”
That’s a powerful statement. Consider the differences between strategic and dysfunctional variability, and look around your plant to identify opportunities to squash dysfunctional vari- ability. Measure the impact on lead time. Better yet, measure the impact on capacity.
One final note on “celebrating diversity.” My most recent Editorials have discussed rec- ognizing diversity within our metalforming plants, and the benefits that result. I received a lot of feedback from readers, mostly positive. I’ll share comments from one reader here, and will share feedback from others later.
Regarding our October issue content, Dave Thomas wrote:
“I want to congratulate you for your inclusion of minority groups in our industry. The spe- cial report on women in manufacturing and your editorial mention of the LGBT communi- ties is a ‘breath of fresh air’ in an industry too often characterized as being staffed by old tool- makers like myself!”
Editor bkuvin@pma.org www.pma.org/blog
4 MetalForming/November 2013
www.metalformingmagazine.com
Serving those who create precision metal products using stamping, fabricating and other value-added processes.
© 2013 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800 | fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | William E. Gaskin, CAE wgaskin@pma.org
Group Publisher | Andrew Flando aflando@pma.org
Editor | Brad F. Kuvin bkuvin@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
Art Director | Donna M. D’Amico ddamico@pma.org
Production Manager | Susan Cubranich scubranich@pma.org
Circulation Manager | Barbara Tillett btillett@pma.org
Marketing Coordinator | Rachel Rokoff rrokoff@pma.org
Sales Staff
MI, OH, Western NY, Western PA, Canada, International Andrew Flando, Group Publisher 6363 Oak Tree Blvd. Independence, OH 44131
Ph: 216/901-8800 | Fx: 216/901-9669 aflando@pma.org
North Central, California
Ryan King
1900 North Hudson #D Chicago, IL 60614
Ph: 773/414-9292 | Fx: 267/219-4308 rking@rkmediaadv.com
New England, Eastern NY, Eastern PA John Wagner
32 Niagara Dr., Suite 101 Mahwah, NJ 07430
Ph: 312/236-4366 | Fx: 312/276-4577 jwagner@wngmedia.com
South Atlantic, South Central Bob West
855 Georgian Hills Dr. Lawrenceville, GA 30045
Ph: 678/377-5749 | Fx: 678/377-9098 metalform_bobwest@msn.com
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
Use smart phone to go to www.metalformingmagazine.com