Page 6 - MetalForming September 2011

Editorial
Brad F. Kuvin
Look Both Ways Before Crossing
Conversations held during last month’s Center for Automotive Research (CAR) Man- agement Briefing Seminars highlighted the automotive industry’s ongoing call for fewer suppliers. I’ve seen analysts call for a 30 to 40 percent shakedown, while Ford intends to cut its supply base in half. Other carmakers speak similarly.
As the supply chains slim, they’ll also be tasked with pulling a heavier load, considering two key factors: projected significant growth in new-car sales and the new CAFE standards. The chain’s links—suppliers at all tier levels—will be forced to form joint ventures, collabo- rating to boost their technological know-how and capacity.
Apparently, many suppliers already have gotten this message, according to recent research conducted on the automotive supply chain by a team at Case Western Reserve University, in Cleveland, OH. We’re proud to report some of the findings from the project in this issue (begin- ning on page 30). But before I get to that, let’s focus for a moment on the mission that’s been laid out in front of this ever-challenged industry.
To meet new fuel-economy standards, we’ll continue to hear calls for expanded use of alter- native materials to steel for lightweighting—aluminum, plastic, composites, etc. However, I have complete faith that automotive steel will be just fine. For example, a recent press release from the Strategic Alliance for Steel Fuel Tanks describes plans to develop lightweight sealed steel fuel tanks with 30- to 40-percent reductions in mass. I expect to see these next-genera-
“As the supply chains slim, they’ll also be tasked with pulling a heavier load.”
tion steel tanks in plug-in hybrid and extended-range electric vehicles by 2017, when the new fuel-economy standards begin to kick in.
In addition to lightweighting, other technologies once believed to be on the fringe of the industry are going mainstream, and metalformers had better pay attention. For example, with the refinement of direct fuel- injection technology, turbocharged engines will soon become com- monplace. Manufacturers must seek opportunities to not only supply components for these engines, but to collaborate with OEMs on the next
generation of turbochargers--compressor and turbine components, for example.
Another area ripe for technology advancement is transmissions. Eight-speed models are commonplace; who knows how many gears the next-generation gearboxes will hold. And, let’s not forget about continuously variable transmissions (CVTs)—no gears here, just pulleys and a metal belt built from high-strength steel stampings. I’m sure there are opportunities for met-
alformers to collaborate with OEMs to improve CVT performance and durability.
From the researchers at Case Western Reserve University we learn that the best possible future for America’s automotive industry is one characterized by long-term collaborative rela- tionships between firms at all tiers. In the past, fears of collaboration with customers arose due to loyalty’s one-way street, as customers were all too quick to ditch a “partner” supplier for a lower-priced competitor. But I’m very happy to report that the Case survey reveals a time- ly trend: In 2007, 32.2 percent of suppliers believed that their customer would help them match a competitor’s efforts to provide a similar product at a lower cost; that percentage swelled to 41.5 percent in 2011. Consider this evidence that the one-way collaborative street may
finally be turning into a two-way street. Just make sure to look both ways before crossing.
Editor
bkuvin@pma.org www.pma.org/blog
4 MetalForming/September 2011
www.metalformingmagazine.com
Serving those who create precision metal products using stamping, fabricating and other value-added processes.
© 2011 by PMA Services Inc. 6363 Oak Tree Blvd. Independence, OH 44131 216/901-8800
fax: 216/901-9669 www.metalformingmagazine.com metalforming@pma.org
PMA President | William E. Gaskin, CAE wgaskin@pma.org
Publisher | Andrew Flando aflando@pma.org
Editor | Brad F. Kuvin bkuvin@pma.org
Editorial Manager | Marlene F. O’Brien mobrien@pma.org
Art Director | Donna M. D’Amico ddamico@pma.org
Production Manager | Susan Cubranich scubranich@pma.org
Circulation Manager | Barbara Tillett btillett@pma.org
Sales Staff
MI, OH, Western NY, Western PA, International Andrew Flando, Publisher
6363 Oak Tree Blvd. Independence, OH 44131
Ph: 216/901-8800 | Fx: 216/901-9669 aflando@pma.org
North Central, California
Ryan King
855 Featherstone Dr.
Fontana, WI
Ph: 773/414-9292 | Fx: 262/394-5269 rking@rkmediaadv.com
New England, Eastern NY, Eastern PA Rick Edman
576 Post Rd.
Darien, CT 06820
Ph: 203/656-1000 | Fx: 203/656-1007 Rick_Edman@edmancompany.com
South Atlantic, South Central Bob West
855 Georgian Hills Dr. Lawrenceville, GA 30045
Ph: 678/377-5749 | Fx: 678/377-9098 MetalForm_bobwest@msn.com
All rights reserved. Reproduction in whole or part without permission is strictly prohibited.
Use smart phone to go to www.metalformingmagazine.com