Hot off the Press



Canadian HVAC OEM Gains Coe Cut-to-Length Line

Thursday, October 11, 2018
Coe Press Equipment, Sterling Heights, MI, announced that it has designed, shipped and installed a cut-to-length line to a manufacturer of custom air-handling equipment in Kingston, ON, Canada. The 66-in. wide line, comprised of a Coe servo-roll feed, a 4-in. x 66-In. power straightener, a 66-in. x 14-in. dual threading table, a 20,000-lb. x 60-in. coil reel, and a 66-in. wide hydraulic production shear, produces blanks in sizes from 24 in. to 192 in. in length and from 24-in. to 60-in. wide. Capable of processing stainless, galvanized or cold roll steels, .030-in. to 0.125-in. thick at up to 362 ft./min., it features centralized operator controls for the straightener and reel, giving the operator a single point of control. Check out the video.


Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors