Tech Update



Electrostatic Lubrication System Easy on the Budget

Tuesday, December 1, 2015

Coldwater Machine Lubricating systemColdwater Machine Co., Coldwater, OH, through an agreement with Avant Garde Technology, Lake Mary, FL, introduces the StaticLube electrostatic lubrication system, for sheetmetal and coil stock. The environmentally friendly setup promises 100-percent efficiency with zero costs for waste, overspray, VOCs, odor or disposal. With its electrostatic atomization venturi system, the lubricant is negatively charged and thus attracted to the neutral, grounded workpiece material. This evenly distributes millions of micron-sized particles of either oil-based or solid dry-film lubricants across the surface of sheets or coils, producing a uniform lubricated surface. This promises to minimize wear and tear on forming equipment and increase tooling life.

Stampers can adjust StaticLube speed from 1 to 1000 ft./min.; use it to lubricate sheet from 0.005 to 0.375 in. thick, and apply coatings of 1 to 1000 mg/sq. ft. Several standard models accommodate ferrous and nonferrous coil or sheet stock in widths from 1 to 75 in.


See also: Coldwater Machine Co. LLC

Related Enterprise Zones: Lubrication

Reader Comments

Posted by: Adam on 12/15/2015 11:57:16 PM - URL:
Hello! I simply would like to provide a big thumbs-up for that good info you have here on this post. I'll be coming back toyour blog for more soon.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors