Hot off the Press



Australian Rollforming Line to Support Solar Project

Thursday, December 5, 2013
Custom rollformer OMCO, Wickliffe, OH, will design, manufacture and provide technical support for a complete rollforming line headed to Australia’s IXL Solar. The line, including pre-punch dies, a stamping press and cutoff station, will manufacture parts for the framing system of a 155-MW solar project. Here’s more on the project; OMCO is online at and


Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors