High-Force Manifold System a Formability Enabler
October 1, 2012Comments
Hyson Products, Brecksville, OH, introduces the Nitro-Dyne 150-bar manifold system, promising to deliver consistent force for reliable part quality, and low pressure rise for improved part formability and increased press utilization. Three cylinder sizes are available: the MOR 5200, with a contact force of 52 kN; the 7700, with a contact force of 77.3 kN; and the 10700, with a contact force of 106.8 kN. Stroke lengths range from 100 to 250 mm.
Hyson Products: 440/526-5900; www.hysonproducts.com
See also: HYSON
Technologies: Tooling
Comments
Must be logged in to post a comment. Sign in or Create an Account
There are no comments posted. Tooling
Thursday, March 7, 2024
All-Electric Clamps Designed to Reduce Emissions, Slash Ener...
Thursday, March 7, 2024
Tooling
Friday, December 1, 2023
PTM Corporation: Your Source for Tool Design and Build, Prot...
Friday, December 1, 2023