Metals/Coil Processing



Norfolk Iron and Metal Commissions New CTL Line

Friday, October 1, 2010
Steel-service center Norfolk Iron and Metal has commissioned a new temper mill cut-to-length line at its facility in Norfolk, NE. The line, designed and built by DBI Manufacturing, Irving, TX, processes coils to 96 in. wide of steel to 0.787 in. thick and to 100-KSI yield strength. It includes a four-high temper mill, two levelers, a six-roll brush cleaning system and a rotary shear. Norfolk Iron and Metal operates five plants to serve steel users in 15 states.

DBI Manufacturing: 972/438-7150;


See also: Delta Steel Technologies

Related Enterprise Zones: Coil Handling

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors