Hot off the Press


 

SHARE:  

Beckwood Delivers Trim Press
to Appliance Maker

Beckwood Delivers Trim Press
to Appliance Maker

Tuesday, June 28, 2005
 
Beckwood Press Co., St. Louis, MO, has delivered a custom trim press for a major appliance manufacturer. The 150-ton-capacity hydraulic press with Beckwood’s new hybrid tie-rod design is used to trim refrigerator doors. It features a 50 by 90-in. bolster, 13-in. stroke, remote power system and thermostatically controlled water-oil cooler. It can reach speeds to 360 in./min on approach, 61 in./min. while pressing and 380 in./min. on return. For more, visit www.beckwoodpress.com.

 

Visit Our Sponsors