Hot off the Press


 

SHARE:  

Cleveland Toll Processor Upgrades Capabilities

Cleveland Toll Processor Upgrades Capabilities

Tuesday, April 16, 2002
 
Ferrous Metal Processing, Cleveland, OH, has acquired a four-high cold-reduction reversing mill that will enable its customers to send their product over for temper rolling to improve flatness, gauge and surface, as well as for cold reduction. The mill should be operational by first quarter of 2003. It can roll steel from 0.037 to 0.312 in. thick, 18.5 to 62 in. wide. FMP is rebuilding and retrofitting the mill for carbon grades, to provide gauge tolerances of plus or minus 0.0005 in.

 

Visit Our Sponsors