MetalForming Delivers Feature


SHARE:  

September 9, 2015

Wednesday, September 9, 2015
 
MetalForming Xtra Newsletter
September 9, 2015
MetalForming
Subscribe | Become a Sponsor |
Read All About It
SMMs Being Pushed to Innovate
As small to mid-sized manufacturers (SMMs) seek that often-elusive competitive edge, “status quo is no longer an option,” writes Elliot Ginsberg for the Hartford Business Journal. Ginsberg is president and CEO of the Connecticut Center for Advanced Technology.

“The usual strategy of budget tightening, cutting expenses, and operating month-to-month or quarter-to-quarter to sustain current profit levels is at the tipping point,” Ginsberg stresses.

Alternatively, Ginsberg offers timely and critical advice for SMMs on where changes must be made. And, he describes several public-policy changes--regionally and nationally—needed to help SMMs “sustain profitability without incurring burdensome capital debt or operating expenses.”

Sponsors
Deburr Both Sides of Sheet Metal in One Operation
CS UnitecDeburr stainless steel, aluminum and other metal sheets up to 0.2" thick with CS Unitec’s ROLEI® BE5. Two speeds enable fine or standard deburring. Two abrasive flap wheels rotate in opposite directions to grind both sides of the metal in one pass. 28” guide rail extensions for large, thin sheets.

Versatility Industrial Tool Storage Cabinets and Change-Over Carts
Versatility Professional Tool StorageEngineered for lean manufacturing principles and designed for more efficient and productive fabrication, Versatility Tool Storage Cabinets and Carts protect and organize your Press Brake and Turret Press Tooling and save valuable time.

  • European Press Brake Tooling
  • Amada Fixed Height Tooling
  • Traditional American Tooling
  • Wila NS, Wilson WT and Trumpf Tooling
  • Wila American, Wilson American Tooling and Trumpf American Tooling

Inside 3D Printing
Santa Clara

October 20-22, 2015
2015 is a blockbuster year for metal 3D printing, with new market entrants, new machines and a stunning growth in the production of finished goods. Inside 3D Printing is returning to Santa Clara on October 20-22, 2015, with a dedicated 3D printing Metal Track. Session topics include: Additive Design and Manufacturing with Metal; Direct Metal Printing in Applications; The New vs. the Old Metal 3D Printing Technologies; Metal 3D Printing for Large Parts and Repair Applications in Industry Verticals; Metal 3D Printing Insights: Past, Present and Future; Important Emerging Developments in Industrial AM; and more. Get 10% OFF passes to Inside 3D Printing Santa Clara at checkout with the discount code METALFORMING. Register now!

Hot Off The Press
The authority on late breaking metalforming news.
Stay ahead of the curve!
> Today's News
> New Magazine Covers 3D-Metal-Printing Technology
> Perforators Association Upgrades Online Knowledge Center
> Flow Opens Waterjet Applications, Training Facility
> Connecticut Spring & Stamping Redesigns Website
You Ought To Know...
> How Regulations Can Strangle Manufacturing
Less-regulated industries perform better—that’s the theme of this article that holds up the state of Arkansas as a perfect example of how regulations can stymie manufacturing growth. The state’s manufacturers have a dismal record of improving worker productivity, which relates directly to excessive regulation, says the article’s author. Only two states, we learn—Mississippi and Alabama—are more burdensome to manufacturers than Arkansas.

The article includes an eye-opening infographic titled, “Labor Productivity Growth in Least Regulated and Most Regulated Industries.”

> Countdown to the Fifth Annual Women in Manufacturing SUMMITT
With just a couple weeks to go until the fifth annual Women in Manufacturing (WiM) SUMMIT, final preparations are being made for the two-day event in Minneapolis, MN, Sept. 23-25. Hundreds of women professionals in the manufacturing industry will attend the event, to take in educational and professional-development sessions and participate in plant tours and networking sessions.

“The WiM SUMMIT is an opportunity for talented women in manufacturing companies to share insights and ideas both for growth as professionals and growth as an industry,” says Dr. Cynthia Arnold, senior vice president and chief technology officer at Valspar Corp. and a speaker at this year’s WiM SUMMIT. Arnold presentation, “Leading an Innovative Organization,” will explore how traditional manufacturing companies can develop innovative approaches, teams and culture.”

Registration for WiM SUMMIT 2015 is still open on the WiM website and plant-tour selection is part of the SUMMIT registration.

Sponsors
Stock Lubrication
Cleans Up Its Act

Unist Stock lubrication can be the ugly side of metal forming with messy presses and sloppy, wet floors. Luckily, those days are over. Uni-Roller systems from Unist use patented, internally-fed rollers to deliver smooth and consistent lube to one or both sides of the stock with no over-application or mess.
Auction – Metal Fabrication Equipment
Hilco CNC press brakes, shears, plate bending rolls, vertical/horizontal band saws, cut-off machines, presses (straight side, gap frame, OBI, hydraulic), seam & stud welders, and more at auction, 16&17 September 2015. Bid online or onsite (Sioux City, IA). Visit www.hilcoind.com for more information and a complete lot catalog.

Top 5 Reasons to Attend WESTEC 2015
Westec
September 15-17 | Los Angeles Convention Center | Los Angeles, CA

  • Discover innovative products & solutions
  • Conduct side-by-side evaluations + Explore & buy from top-line suppliers
  • Meet & network with industry peers & experts
  • Learn from experts & hone your skills

Use promo code PMA when registering at westeconline.com and attend for free!

September 2015 MF

In This Issue:

> Clamps Gain a Grip
on Die-Change Efficiency

With improved die-change ergonomics top of mind, pressroom managers at the new showcase Whirlpool plant embrace hydromechanical clamping nuts to speed changeovers and avoid die damage.

> Apply Change Management to Leap Over ERP-Implementation Hurdles
The road to successful ERP implementation includes placing the process before the technology, setting achievable goals and allowing employees to have 'skin in the game.'
What's Trending?
October
> FABTECH 2015 Show Preview
> Welding
> Additive Manufacturing
November
> Mechanical Presses
> CNC Punch Press
> Pressroom Safety
December
> Press Feeds
> PMA Awards of Excellence
> Laser/Waterjet Cutting
Become Involved
Subscribe to the Magazine
Become a Sponsor
Post Jobs
2015 Media Kit

MetalForming Jobs
Welder/Fabricator (IL) / Barnes International
Sheet Metal Punch Operator (IA) / Geater Machining & Manufacturing, Co.
Tooling Manager (KS) / Confidential
Plant Manager (AB, Canada) / Eaton
Metal Stamping Design Engineer (NH) / Calm Water Business Partner
Sponsors
Every Industry, Every Segment in Manufacturing Invited to WiM SUMMIT
WIMMetalForming magazine is a proud sponsor of the fifth annual Women in Manufacturing (WiM) SUMMIT, September 23-25, 2015, in Minneapolis, MN. Professionals from all levels and industries in manufacturing are invited to attend this event, which offers participants numerous personal- and professional-development opportunities. The SUMMIT agenda includes plant tours, panel discussions, educational tracks, keynote speakers and excellent networking opportunities. Join more than 250 professionals who have chosen a career in manufacturing at SUMMIT 2015. Register for the WiM SUMMIT today!
Education Programs
at FABTECH

FABTECH brings a wealth of innovation and technology solutions to Chicago, IL November 9-12, 2015. The event also provides 100 educational sessions and expert-led presentations covering the latest trends and technology in the metal forming, fabricating, welding and finishing industries.
Powered by MetalForming & PMA

 

See also: CS Unitec, Inc., Versatility Tool Works & Mfg., Unist, Inc., Hilco Valuation Services, Llc

 

Visit Our Sponsors