Latest Video

Upcoming Events

Upcoming events for Metalforming Magazine!

Free E-Newsletters

Sent bi-weekly to inform you of happenings within the metalforming industry.

SIGN UP HERE

Start receiving newsletters and gain access to all content throughout the site.

 
 

Hot Off the Press



SHARE:  

Westward-Ho for Wisconsin Metalformer

Wednesday, September 05, 2012
 
Tenere, Inc., Dresser, WI, a full-service metalformer offering sheetmetal fabrication and stamping, plastic injection molding and tool-and-die machining and assembly, has opened a program and sales office in Northern California, to boost its West Coast presence and support customers in the Bay Area. Chad Korbel will manage the office; www.tenere.com/.

Heavy-Gauge CTL Line to Oregon Metal Slitters

Wednesday, September 05, 2012
 
Oregon Metal Slitters, Portland, OR, has installed a new heavy-gauge cut-to-length line from Red Bud Industries, capable of processing material to ½ in. thick and coil widths to 72 in. Features include a heavy-gauge peeler breaker, roller leveler, variable-rake shear and automatically lowering stack table. Learn more about red Bud heavy-gauge CTL lines here. Oregon Metal Slitters, nearing completion of a 30,000-sq.-ft. addition to its main facility, is online at www.oregonmetal.com/.

Stamper Adds Tailout Feeder to Boost Material Utilization

Friday, August 31, 2012
 
Tier 2 automotive stamper Kalida Manufacturing Inc., Kalida, OH, a division of KTH Industries, has added a Coe Press tailout (or secondary) feeder to one of its press lines, and as a result is experiencing a reduced scrap rate, and a safer process as well. The feeder, installed to deliver material to a Minster E4H-800 four-point press, resides downstream of a servo-feed unit, and telescopes through the press columns and into the die area. This arrangement reduces scrap, and also results in less material being left in the die.--that makes moving remaining material quicker and safer. Coe custom-designed the tailout feeder—4-in.-dia. upper rolls and 5-in.-dia. lower driven roll-- to attach directly to the existing servo-feed unit; www.cpec.com/.

 

Visit Our Sponsors