Latest Video

Upcoming Events

Upcoming events for Metalforming Magazine!

Free E-Newsletters

Sent bi-weekly to inform you of happenings within the metalforming industry.

SIGN UP HERE

Start receiving newsletters and gain access to all content throughout the site.

 
 

Hot Off the Press



SHARE:  

Herr-Voss Opens West Coast
Repair, Reconditioning Facility

Monday, February 17, 2003
 
Herr-Voss, Callery, PA, has opened a facility in Redlands, CA, offering roll reconditioning as well as journal repair, backup support repair and backup bearing reconditioning for Herr-Voss and other brands of levelers. Herr-Voss West also offers mechanical and electrical field service for all makes of coil-processing equipment.
See also: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Stamco Installs Slitting and Inspection Line
for Flat Rock Metal Processing

Monday, February 17, 2003
 
Stamco, New Bremen, OH, has installed a new slitting and inspection line at the 300,000-sq.-ft. Perrysburg, OH, facility of Flat Rock Metal Processing. The line is designed to process a diverse product mix, focusing on cold-rolled, galvanized and prepainted sheet in widths to 80 in. and thicknesses to 0.156 in. The line can handle coils weighing to 100,000 lb. and runs at speeds to 1200 ft./min. Featured are rotary storage trays for the slitters and coil winds, a powered strip threader with loop doubler and a cassette-type corrective leveler. The line performs top and bottom inspection along with defect mapping. Stamco has installed similar lines at Flat Rock’s Portage, IN, and Eldridge, IA, facilities.
See also: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Twin Cities Lands New
Laser Showroom and Training Facility

Friday, February 14, 2003
 
Advanced Mfg. Solutions (AMS) has opened a 5000-sq.-ft. warehouse and showroom in Lino Lakes, MN, 30 minutes from downtown and the St. Louis/Minneapolis airport. The showroom is home to a new Mitsubishi 2512LVP 35CF heavy-duty high-speed laser-cutting machine. AMS will host seminars and customer demos at the facility, as well as operate AMS Laser Service Inc., with a staff of five service techs. Learn more about the laser-cutting machine, for workpieces to 48 by 96 in., at www.mitsubishi-world.com.
See also: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

 

Visit Our Sponsors