QDC Clamp for Dies with a Flat Edge

April 1, 2009

Comments
Serapid, Inc., Sterling Heights, MI, introduces the PSH C-clamp to its line of quick-die-change clamps. The PSH, designed to work with dies with a flat

edge, mounts on a T-profiled base to form a bracket device, which then is manually inserted into a slot on a press bolster or slide. During an automated die change, the clamp head alone can be mounted permanently on the press.
The clamp is hydraulically activated and opened with a spring, and comes in a variety of force ratings from 20 to 100 kN. Clamping height can be individually configured through the height of the base piece or through the use of a custom-sized spacer.

Serapid: 586/274-0774; www.serapid.us

Industry-Related Terms: , ,
View Glossary of Metalforming Terms

See also: Serapid, Inc.