Hot off the Press


 

SHARE:  

Calstrip Orders Braner/Loopco Slitting Line for New Coil Center

Friday, September 28, 2018
 

Calstrip Industries, a multioperation ferrous and nonferrous flat-rolled-coil and sheet distributor and processor, has placed an order for an advanced-technology Braner/Loopco turret head slitting and automatic slit coil packaging system for its new coil center in Blytheville, AR. The production system will process coated and bare high-strength carbon steel and nonferrous coil in widths to 72 in. and in gauges from .015 in. through .25 in. The Blytheville facility will complement Calstrip’s flat-rolled production operations in Mira Loma, CA, Santa Teresa, NM, and Mission, TX, where Calstrip currently operates four Braner/Loopco turret head slitting lines and two Braner/Loopco CTL/multi-blankers.

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors