Facilities
SHARE:
New Press on the Way to Wisconsin
There are 0 comments | Post a comment
Saturday, September 01, 2012
Metalformer and die builder Tools, Inc. announced plans to commission a new 660-ton Stamtec S2-144-55 mechanical press at its facility in Sussex, WI. The new press will run progressive dies at 25 to 60 strokes/min. The firm also operates 95-, 200-, 300 and 600-ton mechanical presses as well as deep-draw hydraulic presses to 1000-ton capacity, and maintains a complete tool and die division.
See also: Stamtec, Inc.
Related Enterprise Zones: Presses
Reader Comments
There are no comments posted at this time.
