Facilities


 

SHARE:  

Honda Adds Multi-Material Blanking Line to 'Bama Plant

Monday, March 01, 2010
 
Automatic Feed Co., Napoleon, OH, has installed a new blanking line at the new Honda plant in Lincoln, AL. The line features automatic changeover capability to process aluminum and steel coil at speeds to 91 m/min. and blanking-press speed to 80 strokes/min. It stamps material from 0.4 to 2.0 mm, for large parts such as body sides as well as smaller interior parts, and uses Automatic Feed’s Soft Piling stacker technology that ensures precise stacks regardless of material type. Soft Piling results in stacks located to within ±1 mm of total stack height.


 

See also: Automatic Feed Company

Related Enterprise Zones: Coil Handling


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors