Filling nearly 400,000 sq. ft. of booth space that displayed the wares of more than 1000 exhibitors, the giant trade-show displayed more than 500 new products. What follows represents a small sampling of the new products introduced in Chicago last November; we’ll present more product introductions from the show in future issues of MetalForming.Award Winners
As part of the show’s activities, the Precision Metalforming Association (PMA) Next Generation Leaders Division awarded three exhibiting companies with Innovation Awards. Next-generation leaders in attendance at the tradeshow visited the booths of companies displaying new materials, equipment/services, and software/machine controls, and then evaluated those companies to determine the winners of the third-annual Next Generation Innovation Awards. Winners were presented with a certificate from Division Chair Jeff Aznavorian of Clips and Clamps Industries, and Vice Chair Rick Bachman of Feintool North America.
The Best New Equipment/Service Innovation Award went to Magnetic Products, Highland, MI, which displayed the Micromag high-intensity magnetic filter manufactured by Eclipse Magnetics, based in Sheffield, UK. Micromag filtration technology uses high-power neodymium rare-earth magnets to remove ferrous and paramagnetic contamination from fluids and proves particularly effective with machine-tool oils, coolants and hydraulic-fluid machinery systems. Removed contamination can be recycled, eliminating disposal costs, and high filtration efficiency means lubricants and coolants last longer; www.mpimagnet.com, www.eclipse-magnetics.co.uk.
The Best New Software/Machine Controls Innovation Award went to Wintriss Controls, Acton, MA, for a new version of its LETS Line Efficiency Tracking Software
Wintriss also introduced its SmartPac2 Servo, (above) a control package developed specifically for servo-mechanical presses. The control uses a inear position sensor to monitor slide position and then save unique bottom and top return positions for each die. It can monitor as many as 10 stages of slide motion, and features three selectable, built-in motion curves for programming limit switch and sensor timing—sinusoidal (similar to a mechanical press), proportional (similar to a hydraulic press) and asymmetrical (three variable-resolution curves are built in, proportional through the top of the stroke with high-resolution areas at the bottom); www.wintriss.com.
The Best New Materials Innovation Award went to Tower Oil & Technology Co., Chicago, IL, for developing Saf-T-Vanish, a synthetic, VOC-free stamping lubricant to replace typical vanishing oils. Saf-T-Vanish contains no hazardous ingredients, uses renewable resources and is totally biodegradable. Drying time is typically half that of solvent-based fluids, and the lubricant does not contain the typical extreme pressure additives, has a high lubricity factor and offers excellent corrosion protection; www.toweroil.com.
Link Electric & Safety Control Co.
Metalformers looking to upgrade the controls on manually fed or moderately automated presses with an affordable resolver/encoder-based press controller need look no further than the new OmniLink System 5100-MPC package from Link Electric & Safety Control Co., Nashville, TN. As described by company officials, the control is ideal for use on smaller presses that don’t need more expensive and feature-laden controls. It features the OmniLink 805 operator terminal, System 5100 card rack and other System 5100 components that provide motor and clutch-brake control, auxiliary press-system control, automation sequencing and interface and production-process monitoring.
A completely new type of shaker conveyor was introduced by Pax Products, Celina, OH, called the EGD (ellipelliptical gear driven) conveyor. The elliptical gear drive produces a reciprocating, varying acceleration motion that conveys parts and scrap exiting a stamping die out of the press area. Compared to a standard linkage design, the use of elliptical gears in a sealed gear box, company officials say, provides four times the acceleration rate and a significantly higher conveying speed at a lower RPM.
At the show was the Model EGD-75, with a maximum total tray weight of 75 lb., maximum part/scrap weight of 250 lb., maximum crossbar length of 72 in. and a fixed conveying speed to 25 ft./min. The company expects to release two additional models in 2010. www.paxproducts.com
Accurate Die Design
LOGOPRESS Corp., Besancon, France, along with its North American distributor and U.S. technical center Accurate Die Design Inc., New Berlin, WI, unveiled the 2010 version of its Logopress3 tool-design software. The new version includes Logopress3 Blank for FEA
The multi-user environment in Logopress3 2010 has been enhanced to better facilitate multiple die designers working concurrently on the same tool design. Also, an often-requested enhancement from users now has been implemented so that when using the Round Draw module, the user can enterndividual reduction percentages in each stage of the draw process.www.accuratediedesign.com; www.logopress3.com/en
Moeller Manufacturing Co.
Moeller Manufacturing Co., Plymouth, MI, introduced to the North American metalforming market the LifePlus lineup of nitrogen die springs
Lempco, Farmington Hills, MI, showcased its redesigned ball cages with several improvements and enhancements. Newly improved orbital staking enhances ball-bearing retention and prevents the loss of ball bearings during use. And the ball cages are now black anodized to provide a protective hard coating. Stampers that use the ball cages will enjoy high-speed press production with less-frequent replacement, said company officials, avoiding costly downtime. www.lempco.com
Amongst the crowded and equipment-laden booth of Lincoln Electric we spied a cool new feature added to the firm’s Power Wave welding power supplies called WeldScore. WeldScore is quality-monitoring software that scores each weld based on a trained sample of an acceptable weld, so that managers can easily monitor weld conditions and variability—on the plant floor or in a training environment. Metalforming companies can use WeldScore to evaluate the consistency of repeat production welds, monitor actual conditions at the welding arc, and train welders when taking on new jobs. www.lincolnelectric.com
Because metalforming shops
Nestled a in a corner of the huge Trumpf booth, which featured six new products in all, the new TruBend machine showcases Trumpf’s innovative spirit with several design features developed to enhance operator comfort and working conditions. Among them: bright LED lighting in front of an behind the ram for optimum lighting conditions without creating heat, and a tilting control panel and height-adjustable worktable to allow the operator to run the machine sitting or standing. Trumpf even includes gas-spring-supported adjustable foot pedals with the machine. www.us.trumpf.com
T. J Snow Co.
While state-of-the-art control technology has brought outstanding reliability and repeatability to the resistance-welding process in terms of precise weld timing and current, not until the addition of servo-actuated welding machines has the variable of welding pressure also enjoyed such precision. And T. J Snow Co., Chattanooga, TN, has accomplished just that with its new servo-actuated press welders that offer a slow approach of the upper welding electrode to minimize electrode wear and optimize weld appearance; improved weld-force repeatability; and instant generation of weld force—no need to wait until air pressure builds as with a pneumatic system.
While servo-actuated robotic resistance-welding guns have been used for years in automotive plants, T. J. Snow now makes the technology available for standard pedestal-type machines for spot and projection welding.www.tjsnow.com
To optimize the performance of press clutch and brake systems on small gap-frame presses, cylinder presses and even small shears, Ross Controls, Troy, MI, introduced to show attendees its DM2 Series D double valve, a Category 4 Size 2 unit with dynamic monitoring and memory functions, optional status indicator for valve feedback and several fault-reset options. Port sizes—1⁄4 and 3⁄8 in. Valves will lock out due to asynchronous movement of elements during actuation or deactuation, resulting in a residual outlet pressure of less than 1 percent of supply; overt action is required to reset the unit.www.rosscontrols.com
Wilson Tool, White Bear Lake, MN, explained to MetalForming that the 2009 edition
See also: Accurate Die Design Software, Inc., DAYTON Lamina Corporation, Lincoln Electric Co., Link Systems, Magnetic Products, Inc., Moeller Precision Tool, Pax Products, Inc., Ross Controls, T. J. Snow Co., Inc., Tower Oil & Technology Co., TRUMPF Inc., Wilson Tool International, Inc., Wintriss Controls Group LLC, LOGOPRESS
There are no comments posted at this time.