Smooth-Return Gas Springs
All SRS models feature built-in return-stroke speed dampening to eliminate pad bounce. In the press, they decelerate during the last 30 mm of the stroke to bring the metalforming operation to a smooth, controlled stop.
The SRS series is available in stroke lengths from 125 to 300 mm, and can be used in self-contained and hosed modes of operation. All models are easily retrofitted into existing dies.
Hyson Products: 440/526-5900; www.hysonproducts.com
See also: Hyson Products
Related Enterprise Zones: Tool & Die
There are no comments posted at this time.