Tooling Update


 

SHARE:  

High-Speed Handheld Tube Beveller

Sunday, June 01, 2008
 
A high-speed, handheld pneumatic beveller from Esco Tool, Medfield, MA, features an automatic pilot-locating system that eliminates setup time and performs end preps in only a few seconds.

The Millhog beveler includes a pilot that automatically seats in the tube ID, and a cutterhead with field-replaceable carbide blade inserts and multiple cutting edges to perform 37.5-deg. end preps. It can bevel a single tube in 3 sec. and can be supplied with an optional track-mount system for rapidly end-prepping full panel sections.

Providing torque-free operation without cutting oils, the Millhog is ideal for repetitive end preps. Straight-through and right-angle models operating at 5000 or 10,000 rpm are offered with working ranges from 0.45-in. ID to 4-in. OD.

Esco Tool: 508/359-4311; escotool.com

 

See also: Esco Tool

Related Enterprise Zones: Fabrication


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors