Free Literature
SHARE:
Presses for Fastener Installation
There are 0 comments | Post a comment
Friday, August 01, 2008
A new series of spec sheets is dedicated to the line of Pemserter presses, from Penn-Engineering, Danboro, PA, for installing self-clinching fasteners. Each sheet provides an overview, features and benefits, and specifications.
Sheets separately profile the Pemserter Series 3000 automatic press, integrating full servo-electromechanical actuation technology; the Series 2000 automatic press system, with upgraded operating features and expansion capabilities; the Series 2000 press equipped with optional dual-bowl and QX turret-tool system; the Series 4 pneumatic press with ram force from 1000 to 12,000 lb.; the Series LT/4 pneumatic press, with ram force of 6000 lb.; and the Series P3 pneumatic press and Micro-Mate hand tool for smaller jobs.
PennEngineering: 215/766-8853; www.pemnet.com
See also: PennEngineering
Related Enterprise Zones: Other Processes, Presses
Reader Comments
There are no comments posted at this time.
