Tech Update


 

SHARE:  

Thick Turret Insert Slitting Die Reduces Material Cost and Waste

Friday, August 01, 2014
 

Thick turret insert slitting die reduces material cost and waste Mate Precision Tooling, Anoka, MN, introduces the Versadie thick turret insert slitting die for D and E stations. The design takes clamp clearing operations to a new level by reducing material cost and waste for slitting operations by punching closely to the clamps, and by allowing users to replace die inserts without replacing the entire slitting die.

Further enhancing productivity, Versadie features easily replaceable die inserts that accommodate lengths to 4.560 in. for E stations and 3.560 in. for D stations. The insert is manufactured from MPM82 high-speed particle-metallurgy tool steel; the die body, easily shimmed after the insert is sharpened, is of S7 shock-resistant tool steel.

Versadie is available in metric and inch sizes in standard rectangle, oval and double-D shapes. Special-order designs are available.

Mate Precision Tooling: 763/421-0230; www.mate.com

 

See also: Mate Precision Tooling

Related Enterprise Zones: Tool & Die


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors