Tooling Update


 

SHARE:  

Quick-Change Tube-Bend Tooling

Tuesday, April 01, 2014
 

AddisonMckee quick-change tool systemAddisonMckee, Lebanon, OH, has designed an innovative quick-change tool system that promises to dramatically reduce the manpower and time required for changing tooling on tube-bending machines. With the quick-change tool system, part-to-part tool changes with either single or multi-stack tooling can be accomplished by one person in less than 10 min.

The system holds the bend die and wiper posts together as a set by a lifting plate, which negates the need for wiper or bracket adjustments during tooling changeovers. Retaining the bend die and wiper posts as a pair makes the wiper inserts less susceptible to accidental damage. The lift plate includes a single hook for removing the bend die and wiper post together via a small crane mounted to the tube-bending machine. An automatic clamp unit quickly locks the bend die and wiper posts to the machine without any additional tools or fasteners.

Also, a tie-bar system incorporates a cam-action release to ensure minimum operator setup time between tool changes. A quick release tie-bar pin provides for effective tie-bar retraction without the need to remove the tie-bar from the machine.

Other features include a quick-release clamp and follower, also removed and replaced from the machine using a lifting hook or by hand.

AddisonMckee: 513/228-7000; www.addisonmckee.com

 

See also: AddisonMckee, Inc.

Related Enterprise Zones: Fabrication, Tool & Die


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors