Straightsides and C-Frames, and a Full Menu of Remanufacturing Services

Tuesday, October 01, 2013

The Heim Group
Booth S4363

In the Heim booth, a before/after remanufactured press and a battery of other services will be displayed. The Chicago, IL company maintains a considerable inventory of remanufactured presses, plus offers the ability to retrofit or rebuild any Heim, Rousselle or select other brands of presses.

Heim engineers its Maxi-Stamper (shown) straightside press with the latest CAD technology. The eccentric-geared tie-rod are available from 300 to 1000 tons, with user-specified stroke, speed, shut height and bed area. Standard drive rating is ½ in. above bottom stroke, but other options are available.

Smaller press requirements are served by the Maxi-Stamper II C-frame, front-to-back shaft designed presses from 90 to 300 tons.



See also: The Heim Group

Related Enterprise Zones: Presses

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors