New Product Article
Heat-Resistant Wear Plate 5- to 160-mm Thick
Toolox 33 (30-35 Rc, 130-142-ksi tensile strength) is designed to have low residual stresses and good machinability. Supplied in plate ¾- to 51⁄8-in. thick, applications include plastic and rubber molds, bending tools and machine components. Toolox 44 (41-47 Rc, 14 ft.-lb. minimum impact energy at 68 F) is designed to have high impact and low residual stresses, and therefore good dimensional stability. Supplied in plate 0.200- to 51⁄8-in. thick, applications include machine components, wear parts, molds, press forming, and die-cast and forging dies.
Visit the IMS website for expert advice on milling, drilling and tapping these two alloys.
International Mold Steel: 859/342-6000; http://www.moldsteel.com/
There are no comments posted at this time.