New Product Article
Automated Laser Tube Cutting
All material loading, cutting and unloading operations are controlled by CNC, and the system control software automatically selects the optimum cutting procedure. Because all machine operations are performed by programmed commands, no manual setups or fixtures are required. Once tubes are placed on the loader they are moved individually into the feeding line with an automated chuck system. The combined action of the two working chucks and drive chuck move and position the tube under the five-axis cutting head according to the program parameters.
After being cut, each finished part is unloaded to a specific programmed position according to length. Parts 10 ft. long can be unloaded onto the short part-unload conveyor; longer parts are sent to a long-part unloader.
BLM Group USA: 248/560-0080;
What’s Happening i am new to this, I stumbled upon this I've found It absolutely useful and it has aided me out loads. I hope to contribute & help other users like its aided me. Great job.