Tech Update


 

SHARE:  

Press-Brake Manipulator System for Heavy Plate

Thursday, September 01, 2011
 

Serapid, Inc., Sterling Heights, MI, provided a dual LinearBeam push-pull positioning system to Pacific Press Technologies, Mt. Carmel, IL, for manipulating heavy plate in press-brake forming operations. The system moves plate weighing as much as 5000 lb. It travels at 15 ft./min. and cycles once every 10 min. It replaced manual positioning, an operation requiring two operators, cutting manual labor in half and increasing productivity by four times.

The Serapid LinearBeam is a mechanical actuator used for load transfer and is rated to 400-ton capacity.

Serapid, Inc.: 586/274-0774; www.serapid.com

 

See also: Serapid, Inc.

Related Enterprise Zones: Tool & Die


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors