New Products



New Line of Servo Presses

Sunday, May 01, 2011

Stamtec, Inc., Manchester, TN, introduces its new CF1 series of servo presses, replacing the standard electric motor, flywheel and clutch/brake with a high-torque, low-RPM servo motor. Proprietary press controls designed specifically for the servo presses achieve a variety of stroke-length and slide-movement profiles, while supplying full working-energy capacity even at low speeds. This allows the user to perform a variety of jobs in one press, such as drawing, restrike and warm forming, and easily adapt to automation and feed applications. In addition, user-defined motion curves allow as many as 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters.

Stamtec: 931/393-5050;


See also: Stamtec, Inc.

Related Enterprise Zones: Presses

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors