Clamping Nut: Clamping Forces with Minimum Torque

Saturday, March 1, 2008
The new hydraulic-mechanical clamping nut from Hilma Div. of Carr Lane Roemheld Mfg. Co., Ellisville, MO, is designed for clamping
Clamping nut
dies on rolling bolsters, press beds and slides. It is useful on machine-tool beds when available space is limited and maximum clamping force is required, or when a hydraulic unit or hose-to-clamp setup is unavailable or not practical.

The new clamping nut provides high clamping forces with minimal torque, is adaptable to different clamping heights and tolerances, and is suitable for retrofitting. It comes in three sizes, with clamping forces ranging from 13,400 to 33,700 lb. Safety features include a built-in preload indicator.


See also: Hilma Div. of Carr Lane Roemheld

Related Enterprise Zones: Tool & Die

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors