Previews


 

SHARE:  

Sensors for Stamping and Welding

Saturday, March 01, 2008
 
Sensors for stamping and welding
Balluff, Florence, KY, will demonstrate how metalformers can apply sensors to increase productivity in stamping operations and weld cells. Its die-protection sensors provide assurance that parts are being produced to customer spec, and that the die is protected from double-hit damage. In-die sensors can verify part-out, slug-out, bend angle, shut height, press parallelism and other die-related conditions.

The firm also offers weld-cell audits to identify incorrect sensor application and inadequate sensor protection from heat, slag and loading impact. On display will be products and techniques—including bunkering, sensor repositioning and shielding with silicone wrap and tubing—to protect sensors from weld-cell hostilities.

www.balluff.com

 

See also: Balluff, Inc.

Related Enterprise Zones: Sensing/Electronics


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors