Free Literature


 

SHARE:  

Presses for Fastener Installation

Friday, August 01, 2008
 
A new series of spec sheets is dedicated to the line of Pemserter presses, from Penn-Engineering, Danboro, PA, for installing self-clinching fasteners. Each sheet provides an overview, features and benefits, and specifications.

Sheets separately profile the Pemserter Series 3000 automatic press, integrating full servo-electromechanical actuation technology; the Series 2000 automatic press system, with upgraded operating features and expansion capabilities; the Series 2000 press equipped with optional dual-bowl and QX turret-tool system; the Series 4 pneumatic press with ram force from 1000 to 12,000 lb.; the Series LT/4 pneumatic press, with ram force of 6000 lb.; and the Series P3 pneumatic press and Micro-Mate hand tool for smaller jobs.

PennEngineering: 215/766-8853; www.pemnet.com

 

See also: PennEngineering

Related Enterprise Zones: Other Processes, Presses


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors