Tooling Update



Clamp Facilitates In-Press Removal of Gas Springs

Tuesday, March 01, 2011
Standard Lifters LLC, Grand Rapids, MI, introduces
Clamp Facilitates in-press removal of gas spring
the gas-spring clamp (GSC)—an all-steel single-tap clamp compatible with all brands of gas springs that allows in-press removal of gas springs. Tightening the fastener constricts the clamp, tightening its hold anywhere along the z axis of the spring body.

Compared to other spring-removal options—flange mount, rear fastening or sheetmetal catch—the GSC eliminates the need for a machined pocket or shims, or any custom fabrication. The GSC comes in eight models for springs 19- to 75-mm dia.

Standard Lifters: 616/301-2181;


See also: Standard Lifters LLC

Related Enterprise Zones: Tool & Die

Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors