New Product Article


 

SHARE:  

Power Supply Now Equipped for CMT Welding

Tuesday, March 14, 2017
 

Fronius has increased the functionality of its intelligent TPS/i Robotics power source, designed for robotic arc welding, to handle the cold-metal-transfer (CMT) welding process. Users benefit from the combination of high and reproducible weld-seam quality and optimum welding speed. The intelligent, modular setup comprises interconnected and synchronized components, and a high-performance processor and high-speed bus that enable quick data exchange. Two synchronized wire feeders ensure dynamic and precise wire feeding, and the compact push-pull welding torch provides easy access to weldments.

Compared to other gas-metal-arc-welding processes, CMT welding reduces heat input and enables continuous regulation from cold to hot. This results in a stable arc and minimal spatter, even at high welding speeds. The process finds use in a variety of applications, including welding light- and medium-gauge sheet from 0.5 to 4 mm thick, thick root passes and galvanized steel.

www.fronius.com

 

See also: Fronius Usa Llc


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors