Previews


 

SHARE:  

Welding and Cutting Systems

Thursday, October 1, 2015
 

Esab
Booth N6074

Esab, Florence, SC, showcases new welding and cutting systems and provides live demonstrations. On display are the Warrior 400i MV CC/CV, a multi-voltage, multi-process welding system that automatically accepts 230-V three-phase or 460-V three-phase power; the heavy-duty Warrior Feed 404 HD that reportedly can reduce cost of operation by 30 to 60 percent compared to other leading brands of feeders due to its drive-roll design, which combines two lower gear-driven rollers with two upper idler/smooth pressure rollers; and the Aristo Feed 4004i HD heavy-duty feeder, which has the same drive-roll design as the Warrior Feed 404 HD.

Also on display, the ET 220i AC/DC and ET 301i AC/DC inverter-based welding systems, which offer full digital control of the gas-tungsten-arc welding arc and weigh just 29.5 and 35.9 lb., respectively.

www.esab.com

 

See also: ESAB Welding & Cutting

Related Enterprise Zones: Welding


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors