Previews


 

SHARE:  

New Punch Press with Two Tooling Options

Thursday, October 1, 2015
 

Murata Machinery USA, Inc.
Booth S1741

Murata Machinery USA, Inc., Charlotte, NC, introduces its Motorum M2558TS/TS-S punch press, designed with two tooling options. The M2558TS incorporates push-pull tooling, which has been in use for more than 75 years and provides an economic, competitive edge by keeping tooling costs minimal, according to company officials. The ram, punch holder and punch are connected to achieve a push-pull action (positive stripping) through the entire punching cycle. Available tooling styles include the traditional 112 & 114, Mate Marathon and Wilson HPÔ.

The spring-style turret enables M2558TS-S operators to utilize tooling from existing inventory. New, quick-release die holders offer rapid tool-change time with simple-access, single-touch opening of turret covers.

The Motorum M2558TS/TS-S is powered by a servo-electric punch-drive system first developed by Murata Machinery in 1994. This technology reportedly allows high production speeds with energy-efficient operation and reduced maintenance costs. Its large turret provides more stations for greater flexibility and increased productivity.

www.turretpunchpresses.com

 

See also: Muratec Murata Machinery USA, Inc.

Related Enterprise Zones: Fabrication


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors